Euro Group UK Conditions of Installation
WHERE INSTALLATION IS PART OF THE QUOTATION
To ensure that our customers receive the best product, the best installation and so the best final result, we at Euro Group UK require that the following conditions are met prior to the installation of Euro Group UK seating products. We will contact you well before installation to ensure that the above requirements are being met. We will then also carry out a final survey prior to installation.
Direct motor vehicle access to the site and uninhibited and uninterrupted access to the appropriate room(s) is required. The room(s) must be free of hindrances that could obstruct the installation work (i.e. scaffolding). Additionally it is required that electricity and proper lighting are available. If the building is equipped with a lift, it too must be available to the fitters.
Regardless of the floor type, the floor surface must be free of any irregularities that could obstruct proper installation of the seating. Additionally, any degree of incline must correspond to our agreed specifications.
FIXING TO THE FLOOR:
In order to determine the type of fixings required, we must be informed of the type of flooring present (concrete, plywood, carpet etc) also the floor must be capable of â€˜holdingâ€™ the fixingsâ€”this is of particular concern with wood flooring. The said flooring must be completed prior to the seating installation with any necessary tests carried out. plywood flooring is to consist of two 18mm sheets cross laid. We are not responsible for any problems arising from the fixings due to an unsuitable floor, sub-floor or floor-covering
Should further construction or installation work follow the installation of Euro Group UK products, the condition of the seating must be evaluated and recorded immediately by a qualified person prior to that works commencement.
Note: Euro Group UK reserves the right to invoice the customer for any additional costs incurred due to any absence of the above requirements.